Introduction to the Characteristics of Ski Jackets

How to choose a ski clothing?

Today I will talk to you about the good and bad of ski clothing, and how to choose ski ski jackets that suit us!

First of all, what is the ski clothing like?

The picture below should be what most friends think. The color is bright, it looks a bit bulky, and it feels a little Low;

Or, the racing ski ski jackets commonly found on the Internet are lighter and thinner, and more consideration is given to the resistance factor in speed;

In fact, ski suit can also be like this;

So let’s focus on the following, and the friends are free to learn

To choose the ski jacket that ski jackets you, you must first understand the basic characteristics of conventional ski ski jackets:

Point 1:

Choose fabrics with waterproof, windproof, breathable and moisture-permeable functions;

Most ski ski jackets are made of functional chemical fiber fabrics. According to the fabric technology and strength index, from high to low, generally 3-layer, 2.5-layer, and single-fabric film fabrics. 3-layer and 2.5-layer fabrics are generally used for single-layer ski ski jackets, and ready-made garments do not require lining; while single-fabric film is generally used for cotton ski clothing and down ski clothing; the windproof and warm-keeping strength index of ready-made garments is the same as the index of the membrane of the fabric. Related, such as 10000mm/5000mvp, the higher the value, the better the waterproof/moisture permeability of the fabric, and the normal 5000mm waterproof can basically prevent heavy rain, so many indicators on the Internet are very high, which is practical for most of us The reliability is not great, and many standards are 20000mm/10000mvp, the actual measurement does not reach the corresponding standard at all;

Point 2:

Seam pressing strip technology;

No matter how functional the fabric is, if the seams of the garment are not glued, it will be useless. There will be needle holes in the seams of the finished garments, and there will be glue strips on the seams inside the ski clothing to prevent water from entering. The quality of the glue strips needs to match the fabric to achieve the best effect;

Point 3:

Wind and snow skirt design;

Regular ski ski jackets have elastic knitted cuffs on the inside of the cuffs, ski pants have snow skirts on the inside of the trouser cuffs, and jackets have snow waist skirts on the inner waist. All designs are designed to better prevent wind and snow and keep warm ; There are detailed descriptions in the national standards, and those that do not have the design characteristics of ski clothing cannot be marked as skiing;

Point 4:

Zipper design with heat dissipation ventilation holes;

Conventional ski jackets and ski pants will have heat dissipation and ventilation holes. Ski ski jackets are generally designed on both sides of the underarms, or on both sides of the chest below the collarbone; ski pants are generally designed on the outer or inner sides of the thighs, and snowboard pants are generally designed in the crotch;

Point 5:

High-neck face protection and windproof design;

The collar height of ski ski jackets is generally relatively high, and it will be raised below the eyes, which can better block wind and snow during sports; high-end single-layer ski ski jackets will be designed with ventilation holes at the neckline for more humanized breathing;

Point 6:

Three-dimensional sleeve elbow and knee design;

General ski jackets will have, according to the needs of sports, enough margin is added at the elbows and knees to meet the needs of users during sports;

Point 7:

Hood and hat three-way adjustment design;

The hooded design is a must, and the height of the hat is generally higher, which can accommodate the helmet and wear it behind, in order to better block the wind and snow; the hat will have two sides and a rear adjustment system to make the hat more suitable for wearing, and at the same time adjust to the most suitable field of view;

Point 8:

Avalanche tracker design;

Professional ski ski jackets generally have a RECCO logo design, which is a life-saving device in case of danger. It can locate the position through the receiver according to the transmitted signal, so as to quickly implement rescue measures;

Point 9:

Adjustable cuffs and cuffs;

The cuffs are usually adjusted with Velcro, which is convenient for adjusting the circumference of the cuffs; the trousers are usually opened and closed with zippers, which is convenient for wearing snowshoes;

Point 10:

Safety reflective logo design;

It is generally designed in a relatively eye-catching and large-movement position, such as the front chest, the middle of the back, the arms, the back of the legs, etc., especially at night to provide a good safety warning and protection;

Point 11:

Anti-wear patch or patch design;

Conventional ski ski jackets are designed with wear-resistant fabric panels in places that are subject to more friction, such as the shoulders of the skis, the cuffs of the trousers, and the knees of the single board;

Understanding some of the characteristics of the above ski ski jackets can provide you with some basic help in choosing ski ski jackets, but it is not enough. To choose a suitable ski suit, the most important thing is to meet your own needs.

for example,

own knowledge of skiing skills,

The climate and environment of the skiing venue,

Are you playing single or double board?

The style you like to wear,

……

In short, the higher the performance index, the better, and the more expensive the clothes, the better. You don’t have to wear ski ski jackets to go skiing. Some people just want to look good; some people just want professional equipment, and some people like it. Be different, etc., but you must try to understand the characteristics of the above ski ski jackets, as well as your own skiing conditions, and choose what to wear for skiing while considering your own safety.