The class D audio amplifier is projected to rise in the coming years. The audio amplifiers are used for reproducing the input audio signals at sound-producing output elements, with desired power levels and volume at low distortion.

Audio frequencies usually range from 20 Hz to 20 kHz, so the amplifier gives a good frequency response in this range. Power capabilities vary massively relying on the application, from milliwatts in headphones to a few watts in PC audio or TV, to tens of watts for mini home stereos for automotive audio and mini home stereos, to hundreds of watts or more for powerful commercial and home sound systems.

A direct implementation of analog involves an audio amplifier to utilize transistors in linear mode to develop an output voltage, that is concerned with as input voltage copy. The forward voltage gains primarily high. If the feedback loop involves forward gain, then the overall loop gain is high.

Feedback is also utilized for improving performance in high loop gain. It involves suppressing distortion caused by nonlinearities in reducing the power supply noise and forward path, by increasing the power-supply rejection.

In a conventional transistor amplifier, the transistors supply instantaneous continuous output current in the output stage. There are numerous possible implementations for audio systems, such as Classes A, AB, and B. The output stage dissipates large power compare to Class D designs. The difference offers major advantages of Class D in various applications due to lower power dissipation that produces less heat and saves space, cost, and circuit board, with increasing the life span of the battery in portable systems.

Linear-amplifier output stages are used for directly connecting to the speaker. The bipolar junction transistors usually operate in the linear mode, if utilized in the output stage. The output stage involves MOS transistors implementation.

The class D modulators' implementation in various ways, supports a massive quantity of relevant research and intellectual property.

All the Class D modulation techniques involve encoding information on an audio signal into a pulse stream. Usually, the pulse widths are connected to audio signal amplitude, and the pulse spectrum includes undesired high-frequency content and desired audio signal.

The total power in the time-domain waveforms is similar, it results in the same total integrated high-frequency power in all schemes. This energy is shaped for the elimination of the tones, with a higher noise floor.

The major players operating in the industry are; Texas Instruments Incorporated, Infineon Technologies AG, ROHM Co. Ltd., NXP Semiconductors N.V., Analog Devices Inc., STMicroelectronics N.V., and Monolithic Power Systems Inc.

Therefore, the demand for class D audio amplifiers is rising due to the high capacity for amplifying low-amplitude sound signals to higher-amplitude sound signals and increasing the battery life of devices in which they are used.